Filter
Top Products
16
PAge heAder.....
OPERATING YOUR BREVILLE PRODUCT
WITH THE JUICE NUTRI DISC™ OR
PUREE DISC
1. Wash your selection of fruit and/or
vegetables to prepare them for juicing.
WARNING
Do not put hard fruit and vegetables
(ie. Carrots , apples , fresh beetroot ,
etc.) or ice through juicer when using
Puree Disc. This could damage parts of
the unit.
2. Ensure the juicer is correctly assembled
– see assembling instructions. Ensure
the Nutri Disc™ or Puree Disc is
thoroughly cleaned before each use.
Ensure you place the Juice Jug (or glass)
under spout before commencing juicing.
3. Plug the power cord into a 110/120V
power outlet. The light surrounding the
‘Start | Stop” button will illuminate.
NOTE
The light will be illuminated for 2
minutes before fading into sleep
mode. The light will come back on by
activating any of the controls.
4. Use the speed selector table as a guide
for juicing different fruit and vegetables.
Push the “Start | Stop” button and the
Juicer will automatically start.
5. With the motor running, place food into
the Feed Chute using the Food Pusher,
gently guide food down the Feed Chute.
Do not exert excess pressure. To extract
the maximum amount of juice, always
push the Food Pusher down slowly.
6. As fruits and vegetables are processed
juice will flow into the juice jug and the
separated pulp will accumulate in the
Pulp Container. The Pulp Container can
be emptied during juicing by turning the
juicer OFF at the control panel and then
carefully removing the Pulp Container.
Replace the empty Pulp Container into
position before continuing to juice.
NOTE
Do not allow the Pulp Container
to over fill as this may affect the
operation of the appliance.
NOTE
To minimize cleaning, line the pulp
container with a produce bag to
collect the pulp. Pulp can be used in
other dishes, or as a compost for the
garden or discarded.