Breville the Juice Fountain Duo Juicer User Manual


 
17
PAge heAder.....
OPERATING YOUR BREVILLE PRODUCT
NOTE
OVERLOAD PROTECTION BUTTON
The Breville juicer is fitted with
a safety device which safeguards
against overloading with excessive
loads. If this occurs, juicer will
automatically activate the overload
protection button and the unit will
turn itself off. If this occurs, remove
the plug from the outlet and allow the
unit to cool. Then press the Overload
Protection Button found on the bottom
of the Motor Base. The safety device
will then be reset and the Breville
juicer is ready for use again.
USING THE PUREE DISC
When using the Puree Disc, puree will flow
into the juice jug. There will be no pulp
extracted into Pulp Container.
NOTE
SELF-RESET OVERHEATING
PROTECTION The Breville juicer
also fitted with a self-resetting safety
device which safeguards against
overheating on the motor with
excessive loads. If overheating occurs,
the juicer will automatically activate
the overheating protection device
and the motor will turn itself off. If
this occurs, the light surrounding
the Start|Stop button will flash red.
When the overheating protection
is activated, unplug the juicer from
power outlet for at least 15 minutes
to allow the unit to cool. Then plug
juicer into the power outlet and use as
normal.
NOTE
ELECTRONIC PROTECTION The
Breville juicer will automatically stop
operating if the motor is stalled. This
is an electronic safety feature. Either
too much food is being processed at
one time or the pieces are not small
enough. Try trimming food, cutting
food into smaller pieces of even size
and/or processing a smaller amount
per batch. If this occurs, the light
surrounding the Start|Stop button will
flash red. To continue juicing, turn
the power OFF at the control panel,
clear the feed chute, finally turn the
appliance back on by pressing the
Start|Stop button to ON.