Filter
Top Products
5.6 OPERATING C34 / CMR CONTROL
5.6.1 C34 / CMR CONTROL DESCRIPTION
5.6.2 USING C34 / CMR CONTROL
• OFF: To stop the unit, slide the button on this position.
• N
ORMAL: For a day-to-day usage, slide the button on this position. The
unit then will operate on normal speed.
• B
OOST: For a high speed operation, slide the button on this position.
Generally used when extreme conditions occur, eg.: parties,
smokers, etc.
• R
ECIRCULATION: For a normal speed operation, without exchanging air with
the outside, slide the button on this position. This mode is
recommended in high humidity days (rain, heat wave).
Also, use it when the outside temperature is extremely cold
and/or the inside air is too dry. It can be used also to recirculate
the heat coming from a wood stove throughout the house,
or the fresh air from a cooling system.
5. CONTROLS (CONT’D)
VC0048
NORMAL INDICATOR:
LIGHTS UP WHEN SLIDE
SWITCH IS ON NORMAL
POSITION.UNIT IS OPERATING
ON NORMAL SPEED
.
FRESH AIR INDICATOR:
LIGHTS UP WHEN SLIDE
SWITCH IS ON
NORMAL
OR BOOST POSITION.
FILTER MAINTENANCE
INDICATOR
:
FLASHES WHEN IT IS TIME
TO REPLACE PREFILTER
AND WASH CORE FILTERS.
S
EE BIANNUAL
MAINTENANCE IN
SECTION 6.
LIGHTS UP WHEN IT IS
TIME TO REPLACE FILTER
AND PREFILTER AND
CLEAN CORE AND CORE
FILTERS
.SEE ANNUAL
MAINTENANCE IN
SECTION 6.
RESET FILTER HOLE:
O
NCE THE MAINTENANCE DONE, RESET THE FILTER
MAINTENANCE INDICATOR BY CAREFULLY INSERTING
A SMALL ROD (EG: PAPER CLIP) IN THE RESET FILTER
HOLE, DURING 1 SECOND.THE FILTER MAINTENANCE
INDICATOR WILL TURN OFF
.
BOOST INDICATOR:
LIGHTS UP WHEN SLIDE
SWITCH IS ON
BOOST
POSITION.UNIT IS OPERATING
ON HIGH SPEED.
RECIRCULATION INDICATOR:
LIGHTS UP WHEN SLIDE
SWITCH IS ON
RECIRCULATION.UNIT IS
OPERATING ON NORMAL
SPEED
.
- 33 -