Filter
Top Products
11
PROGRAMMING THE DISPENSER
The following function screens are in order of appearance. Each screen will have instructions on how to ac-
cess, and the procedures to program the various functions of the dispenser. To enable programming, place the
NORMAL/PROGRAM/RINSE” switch in the “PROGRAM” position.
IMPORTANT PROGRAMMING NOTES - READ CAREFULLY
To exit the programming mode at any time, press and release the exit (center) switch located on the front
touch screen. The display will return to the PROGRAM HOME SCREEN.
Open the front door to access the two mode switches:
1. ON/OFF/NIGHT switch:
ON: Enables all dispenser functions.
OFF: Disables all dispenser functions.
NIGHT: Disables all dispense switches. Tank refill and heating still functions.
2. NORMAL/PROGRAM/RINSE switch:
NORMAL: Allows all dispenser functions. Must be in this position for dispensing.
PROGRAM: Allows access to program menus using touch screen on the front door.
RINSE: Disables hopper motors. Pressing dispense button on the front door will dispense dilution water
and power the whipper motors for 10 seconds.
2
1
45304.1 090611