13
No-Name Recipes
The No-Name recipe screens are accessed by clicking on one of the “No-Name Recipe” buttons on the switchboard screen. The
“Coffee Name” in the No-Name recipe screen is filled in automatically by the application and cannot be edited. The “Coffee Number”
for a No-Name recipe is always 000 and cannot be changed.
No-Name Recipe Notes
When a brew funnel is inserted in under the sprayhead of the BrewWISE
®
brewer, the information stored in the funnel handle is
read by the brewer.
If the coffee was ground into the funnel by a BrewWISE
®
grinder, then the Coffee Name, the Coffee Number, and the batch size
information would have been stored in the funnel handle. The brewer reads this information, looks into its memory, and retrieves the
corresponding brewing recipe.
If the coffee in the funnel did NOT come from a BrewWISE
®
grinder, then there is no information in the handle. When placed into
the brewer, only the fact that the funnel is present is detected. In this case, the brewer uses the “No-Name” recipe since there is no
name to look up in memory. On a Dual brewer, it is possible to have two different No-Name recipes, one for the left brewing head and
one for the right.
After a No-Name recipe has been filled in completely, it may be transferred to a recipe card by clicking the “Write” button. Make
sure that the card is in place on the Writer Box before clicking the “Write” button. A progress bar and a message label will appear at
the bottom of the recipe form during the write process in order to keep the user informed as to the status of the write. If the card
returns the correct response to the PC, the application displays “Writing Successful”. If the timeout period is reached before the
memory card is written, the application displays “Write Has Timed Out”. Generally, this is due to one of three things;
1 - The memory card has been locked from a previous write, 2 - The memory card is not properly in place on the Writer, Or 3 - The
Writer hardware is not properly connected to the PC.
34446 070804