Filter
Top Products
8
GROUND COFFEE COUNTER
The grinder will keep a running total of the pounds of coffee the grinder has ground. This running total is
shown in the “PmBurrsLbs #” menu, under the “SERVICE TOOLS” menu. This running total can be used to
determine when the grinding burrs need cleaning or replacement. Pressing the button under “RESET” will reset
this total to zero.
GRINDER SCALE CALIBRATION
1. Place empty funnel into funnel rails.
2. Press and hold the right hidden (copyright) button until the “MACHINE TYPE” menu appears. (See level 2
programming)
3. Press the middle button under the screen until the “CALIBRATE SCALES?” menu appears.
4. Press the right button under “YES” in the “CALIBRATE SCALES?” screen.
5. Press the middle button under “TARE”.
6. When the “PLACE 8oz” screen appears, remove the funnel, and place a calibrated 8oz weight in the funnel.
Replace the funnel in the funnel rails.
7. Press the middle button under “DONE”. The grinder will go through a calibration, and then return to the
main screen when calibration is complete.
8. Remove the weight from the funnel. The grinder is now ready calibrated and ready for normal operation.
BATCH SIZE SETTING
1. Press and hold the right hidden, (copyright) button until the “REVIEW RECIPIES” menu appears. (See level
1 programming)
2. Press the button under “YES” and the “COFFEE NAME” screen appears.
3. Press the button under “NEXT” until the name of the coffee you wish to set the batch sizes for appears.
4. Press “MODIFY” under the screen containing the name of the coffee you wish to set the batch sizes for.
5. Using the buttons under (-) and (+), change the weight displayed to the new weight desired. Press a differ-
ent batch size button to set the weight for that batch size. Press the button under “DONE” when complete.
6. In the “3 BATCHES DONE” menu, if no further changes are to be made, press the button under “YES” to exit
the “COFFEE CALIBRATION” menu.
COFFEE CALIBRATION
1. After the “3 BATCHES DONE” menu, press “YES” to enter the “COFFEE CALIBRATION” menu.
2. This menu sets the “offset” weight for the coffee name selected, so that accurate weight grinding will be
achieved.
3. With a funnel in place, press the “GRIND” button. After grinding, the coffee weight will be read and cali-
brated, and the “COFFEE NAME” “SETUP COMPLETE” menu will appear. Press the middle button to loop
back and select another coffee name for batch size setting and calibration.
41451.0001 051010