Filter
Top Products
12
Displays Software Version # -
Exits To Home View After 3 Seconds.
PROGRAMMING THE DISPENSER
Two basic modes are available to the operator: Display Mode and Program Mode. Open the dispenser door to
access the digital Programming Switches with LED display. To enter the Display Mode, Set the RUN/NIGHT/
PROGRAM Switch to the RUN position.
Display Mode: Used to view the current set-up values. Use the MENU switch to scroll to the next display.
NOTE: The display blanks out after two minutes of inactivity. Press any button to activate the display.
LED DISPLAY DISPLAY MODE DESCRIPTION
Home View LCR-1 Alternates between the Tank and
Cabinet Temp.
LCA-1 Displays Tank Temp only.
Tank Temperature Displays Target Tank Temperature (F°)
Dispense Ratio Displays Dispense Ratio (XXX:1)
Portion Volume Displays Portion Dispense Volume
(XX.X Oz.).
Set to 0.0 to Disable.
Dispense Total Displays Total Coffee Concentrate
Dispensed (XX.X Gal)
Rinse Alarm (Hrs) Displays The Number Of Hours
Between Required Rinses.
(Default = OFF, Alarm Disabled)
MENU (-) (+)
1
8
0
MENU (-) (+)
0
1
8
0
MENU (-) (+)
03
1
MENU (-) (+)
3 0. 0
MENU (-) (+)
O
4 F F
MENU (-) (+)
0
2
0.
Software Version
MENU (-) (+)
XX.
X
44806.1 081211