Filter
Top Products
3
USER NOTICES
Carefully read and follow all notices on the equipment and in this manual. They were written for your protec-
tion. All notices are to be kept in good condition. Replace any unreadable or damaged labels.
27442.0000
00986.0002
33461.0000
CHARGE
Type R134A, Amount 10 oz (283 gm)
Design Pressures:
High 335 psi (23 bar) (2.31 MPa)
Low 88 psi (6 bar) (0.61 MPa)
CONTENTS
Warranty ........................................................................................................................ 2
Introduction ................................................................................................................... 3
User Notices .................................................................................................................. 3
Initial Set-Up & Electrical Requirements ........................................................................ 4
CE Requirements ........................................................................................................... 4
Plumbing Requirements ................................................................................................ 5
Plumbing Hook-Up ........................................................................................................ 5
Operating Controls ......................................................................................................... 6
Initial Fill ........................................................................................................................ 8
Dispenser Use ................................................................................................................ 9
Cleaning ....................................................................................................................... 10
Adjustments & Optional Settings ................................................................................. 13
Function Lists .............................................................................................................. 18
Troubleshooting ........................................................................................................... 21
Coolant Diagram .......................................................................................................... 28
Schematic Wiring Diagram .......................................................................................... 29
MAXIMUM RINSE WATER TEMPERATURE: 170˚F (76.6˚C)
Use Bunn-O-Matic tubing, part number 32759.10XX
(See Illustrated Parts Catalog for complete part number)
for hot water connection.
• Use Bunn-O-Matic tubing, part number 32759.10XX for all connections.
(See Illustrated Parts Catalog for complete part number)
• Clamp all hose connections with Bunn-O-Matic part number 21275.0003 (hose clamp)
34054.0000A 10/01 ©2001 BUNN-O-MATIC CORPORATION
NOTES:
Alternate Connection
(When Hot Water source is not available)
Hot Water Rinse Connection
RINSE WATER
CONNECTION
RINSE WATER
CONNECTION
Cold Water
Connection
MAIN WATER
CONNECTION
MAIN WATER
CONNECTION
3/8" x 3/8" x 3/8" Barb Tee
B.O.M. PN 32750.0000
(may be installed internal or
external to the dispenser)
Hot Water
Connection
(See Caution)
Cold Water
Connection
Install Water
Strainer Here
Install Water
Strainer Here
34054.0000
(Early Models prior to the Water Inlet Valve)
38218.1 030308
This equipment must be installed to comply
with the International Plumbing Code of the
International Code Council and the Food
Code Manual of the Food and Drug Adminis-
tration (FDA). For models installed outside
the U.S.A., comply with the applicable
Plumbing /Sanitation Code.
00656.0000