Bunn S/N DUAL068000 Coffeemaker User Manual


 
Page 22
BREW OZ (SETTING OR ADJUSTING BREW VOL-
UMES)
This function allows adjustment of the brew vol-
umes for each batch. The indicator signifies volume
in ounces per batch.
Procedure for modifying recipes - brew ounces:
Range: 10.0 oz to 400 oz for all three batch sizes
1. Press and hold upper right hidden switch (®) until
the display reads UNITS. Release the switch, then
press and release switch until the display reads
REVIEW RECIPES.
2. Press YES to proceed. The display should now
read NO-NAME LEFT, along with MODIFY, SHOW
and NEXT.
3. Press and release NEXT to advance to the desired
coffee name to be modified.
4. Press and release MODIFY. The display should
read BREW OZ: and a batch light will be blinking.
REVIEW RECIPES?
NO YES
3 BATCHES DONE?
NO YES
BREW OZ. XX.X
(-) DONE (+)
% BYPASS XX.X
(-) DONE (+)
NO-NAME LEFT
MODIFYSHOWNEXT
(COFFEE NAME)
MODIFYSHOWNEXT
THAT WAS THE
LAST RECIPE
EXIT TO
NEXT FUNCTION
SCREEN
ADVANCES TO ALL OTHER
COFFEE NAMES PROGRAMMED
IN THE BREWER'S MEMORY
WHEN THE LAST COFFEE NAME
IN THE BREWER'S MEMORY IS
DISPLAYED, PRESSING NEXT
WILL EXIT AND THE DISPLAY
WILL THEN READ:
SEE MODIFYING
BYPASS PERCENTAGES
ON THE FOLLOWING PAGE
OR PRESS AND RELEASE
EITHER ON/OFF SWITCH TO
EXIT THE BREW OZ: SETUP
AND RETURN TO THE MAIN
SCREEN
P2291
Press and release the batch size to be modified.
5. Using (-) and (+), set the amount of brew water,
in ounces, to be dispensed over the grounds for
that particular batch size.
6. When finished, press another batch size and repeat
step 5 for that size for each batch size to be modi-
fied. Continue setting all batch sizes.
7. When finished setting all batch sizes, press and
release DONE. The display should read 3 BATCH
SIZES DONE?
8. If the three batch sizes are not correct, press and
release NO to return to the BREW OUNCES setup
screen and repeat steps 5, 6 and 7.
9. If the three batch sizes are correct, press YES. This
will advance to the % BYPASS function. Another
alternative is to press and release either ON/OFF
switch to exit the BREW OZ setup and return to
the MAIN SCREEN.
PROGRAMMING THE BREWER (cont.)
29877-3 062005