Filter
Top Products
AirPcap User’s Guide 13
the traffic from all the installed USB AirPcap adapters, as if it was coming
from a single device (this feature does not include traffic from the AirPcap
N adapter).
Specific Settings for the
Multi-Channel Aggregator
List of Aggregated
Channels
The Aggregator Uses the
Global List of WEP Keys
Specific Settings for the
Multi-Channel Aggregator
List of Aggregated
Channels
The Aggregator Uses the
Global List of WEP Keys
Figure 4: Multi-Channel Aggregator
As Figure 4 shows, the Multi-Channel Aggregator has its own FCS,
Capture Type and FCS Filter settings. These settings, and not the ones of
the physical adapter, will be used when capturing from the Aggregator.
Note that it’s not possible to set the channel of the Multi-Channel
Aggregator; instead, the channel drop-down box will show the list of the
aggregated channels . To change the channel of any individual adapter,
select the Capture adapter from the Interface drop-down list, and set the
desired value in the channel drop-down box.