Filter
Top Products
31
INSTALLATION INSTRUCTIONS
The cooker is designed to match the depth of standard 600mm worktops.
An adaptor backplate should, therefore, be fitted within the shaded area shown to allow the cooker to be
pushed fully to the wall. If a forward facing backplate
is used, it m ust be chased into the wall.
250
750
Connection to the cooker should be made with an approved appliance flexible connection to BS 669. A length of
0.9 to 1.25m is recommended. The length of hose chosen should be such that when the cooker is in situ, the
hose does
not touch the floor.
The temperature rise of areas at the rear of the cooker that are likely to come in contact with the flexible hose do
not exceed 70°C.