Filter
Top Products
is no need to pull out the drawer unless you see the message
EMPTY GROUNDS (chapter 27.4).
Please note: You can always stop the brewing process by
pressing the Rotary Dial or any of the eight beverage buttons.
This will not affect the pre-set values.
11. OVERRIDING STRENGTH AND CUP SIZE DURING
BREWING.
With the Z5’s override feature you are always able to change
certain settings just before brewing without affecting the pre-set
values. This is a great feature if you are in the mood for a different
kind of coffee which is not programmed. (For changing pre-set
values see chapter 25 and 26).
For the four coffee buttons on the right side, you can override
the strength and the coffee volume.
COFFEE READY
• First turn the Rotary Dial. It will display five different strength
settings XMILD, MILD, NORMAL, STRONG, XSTRONG.
• Select the one you like and then push one of the four coffee
buttons. Once you pushed the coffee button, the display will
again show the strength setting you just selected.
• You can now change the coffee volume.
• Turn the Rotary Dial and the display will show the coffee volume
in oz. Turn the dial until the desired volume is set.
Please note: When you select a different strength you must
push one of the coffee buttons within the next 3 seconds,
otherwise the Z5 reverts back to
COFFEE READY.
Please note: When you push one of the double cup buttons and
you change the volume, the display will always show the volume
per cup, e.g. if you choose 7 oz. the Z5 will actually brew a total
of 14 oz.
Example: The 1-cup Espresso button is programmed to
STRONG and approx. 1.5 OZ.
Assume you want to use this button to make a MILD 4 oz. cup.
COFFEE READY
• Turn the Rotary Dial until the display shows MILD, push the
1-cup Espresso button. The Z5 starts grinding and displays MILD.
• When it starts brewing, turn the Rotary Dial until the display
shows
4.0 OZ.
The next time you use the 1-cup Espresso button it will produce
the pre-set value STRONG, 1.5 oz..
12. AUTO CAPPUCCINO SYSTEM
The three buttons on the left side of the operating panel produce
beverages which are brewed through the Auto Cappuccino
System (Fig. 1,13). We recommend watching the DVD.
The Auto Cappuccino System has the following components:
• Dual fixed spouts coming out of the machine, (Fig. 5).
• Dial Component with the small removable venting tip (Fig. 5a).
• The removable Dual Nozzle system. The long system is already
attached to the machine. If you use tall cups or glasses you
can replace the long Dual Nozzle System with a shorter one
(Fig. 5b). It is included in the Welcome Pack.
The nozzle that is positioned closer to the machine will deliver
coffee, this is called the Coffee Nozzle (Fig. 5e). The nozzle in
the front will deliver hot steamed and frothed milk, this is
called the Milk Nozzle (Fig. 5e).
15.