Filter
Top Products
14.
11. Decalcifying
Your CoffeeTEAM Therm has a built-in decalcifying monitor. After
800 cups of coffee the display will show “DESCALE” reminding
you that it is time to decalcify the coffee maker. Please follow the
instruction below. After you have descaled the machine, you can
reset the display as follows:
• Push the P button and turn it until the message appears
RESET DESCALE.
• Push the button and turn to select YES and push the P button
again. The display will revert to its normal status and the
descale message will not show again.
If the descale-message does not appear in the display within 6
months after regular use or whenever the brewing process slows
down, we recommend decalcifying. If brewing 10 cups of water
takes more than 10 minutes, it is time to decalcify.
Attention:
• Before decalcifying, remove the Goldtone Filter.
• All decalcifying agents are acidic and must be handled
carefully. Check the information on the packaging before using.
Caution: Never open the water container lid as long as the
machine processes any liquid. Hot water could spill out causing
burns and injuries. Wait until all water is processed through the
machine or until the On/Off button is no longer illuminated.
11a. Decalcifying with DURGOL
Capresso recommends DURGOL for drip coffee makers. Durgol
removes any calcium deposit up to 20 times faster than vinegar.
Durgol is available through www.frieling.com.
1. Remove Goldtone Filter.
2. Fill water container with 18 oz. of cold water and add 6 oz.
Durgol.
3.
Important: Make sure the filter holder is in place and the
Stainless Steel Carafe is empty.
4. Place the carafe with the lid closed on the pedestal.
5. Turn the machine on.
6. When the solution has run through, remove the carafe, empty
and rinse thoroughly.
Important: let the machine cool down for 5 minutes.
7. Fill 20 oz. of fresh cold water into the water tank and brew
through the machine.
11b. Using other Decalcifying Agents
Only use decalcifying agents suitable for drip coffee makers and
follow the instructions which come with the agent.
12. FAQ (Technical Questions)
Q1. I accidentally locked the filter holder underneath the
grinder. What do I do?
A.
Push the manual filter holder release button (Fig. 14).
Q2. There is no coffee coming out of the grinder. It seems as
though the coffee is completely clogged inside the grinder.
What do I do?
A.
Please follow the steps outlined in chapter 10f, page 13.
Q3. Can the grinder run without beans in the bean container?
A.
Yes.
Q4. Can I have different grinding settings for the current and
the programmed mode?
A.
Yes! See chapter 7.2,d and e, page 9.