Capresso Z5 Coffee Grinder User Manual


 
Impressa
Z5/Z6
Quick
Reference
Guide
This Guide does not replace the Operating Instructions.
For details and cautions you must read all instructions.
Watch the DVD instructions!
Traces of Coffee Grounds in New Machine?
This is normal! Grinder was tested during assembly with
beans. Despite cleaning, traces of ground coffee may
be found.
RED TEXT represents display text. Illustration numbers
on next page correspond with Operating Instructions.
A) First Time Ever Preparation
1. Fill water in tank, open Cover Lid (spring activated!),
remove Bean Container Safety Lid and add beans.
Only regular beans, no flavor
ed or coated beans
!!!
Replace Bean Container Safety Lid (Fig. 4).
2. DO NOT install the Clearyl Filter Cartridge now!
3. Turn the Main Power Switch on (bottom left by cord).
4. Push On/Off button on top (Fig. 3). Place a large cup
under the Hot Water Spout / Coffee Spouts and one
under the Auto Cappuccino System (ACS) (Fig. 5e).
PRESS RINSE. Push the Rinse button. SYSTEM
FILLS, then WELCOME TO JURA then UNIT IS
HEATING
then PRESS RINSE. Press the Rinse
Button. COFFEE READY.
5. Leave the cup under the coffee spouts and push the
1-cup Espresso Button. FILL BEANS. Push the
1-cup Espresso Button again. Wait until the Z5/Z6
displays
COFFEE READY. Discard the coffee.
6. Your next cup will be perfect.
B) Daily Preparation
Fill fresh water in tank and check bean container.
Push On/Off button (Fig. 3).
MACHINE IS HEATING
then RINSE. Place a cup under the coffee spouts
and press the Rinse Button.
COFFEE READY.
C) Installing the Auto Cappuccino System (ACS)
Attach the Dial Component to the Dual Fixed Spouts.
(Fig. 5c)
65351R2