Filter
Top Products
T) Programming
The Z5/Z6 provides programming, maintenance and look-up
functions. For details see chapter 26 in the Operating
Instructions.
COFFEE READY
Push and hold the Rotary Dial until the Display shows
FILTER. Turning the dial clockwise lets you access the func-
tions listed below. To get back to
COFFEE READY turn until
the display shows
EXIT and push the Rotary Dial. If you want
to get into a function, push the Rotary Dial again, and sub-
functions will appear. Turning the Dial will show you different
options within the sub-functions.
Function
• Sub-functions Comment
FILTER NO
• FILTER YES Install and activate the Clearyl Filter
• FILTER NO
HARDNESS 10º DH When not using the Clearyl cartridge,
• Not active or set the hardness to your water.,
• Six hardness levels See chapter 24 Operating Instructions.
MAINTENANCE
• RINSE UNIT Allows you to run extra cleaning
• CAPPUCCINO cycles, even if the Z5/Z6 does not
CLEANING prompt you to do so.
• CHANGE FILTER
• CLEAN UNIT
• CAPPUCCINO
RINSING
• DECALCIFY UNIT
TEMPERATURE
• LOW Change the temperature for each
• NORMAL coffee button, see chapter 26.2
• HIGH Operating Instructions
AROMA
• XMILD Change the coffee strength for
• MILD each coffee button. The amount of
• NORMAL ground coffee varies between approx.
• STRONG 5 and 16 grams.
• XSTRONG
CAPPUCCINO Change the pre-sets without brewing.
MILK Change the pre-sets without brewing
ENERGY
• SAVE NO NO: Z5/Z6 is always ready
• SAVE LEVEL 1 Level 1: heats up for steam
• SAVE LEVEL 2 Level 2: heats up for water and steam
TIME Set actual time