Capresso Z5 Coffee Grinder User Manual


 
shows FILTER RINS. Do not interrupt. After 90
seconds the display shows UNIT IS HEATING then
COFFEE READY.
Q) Messages
Immediate Action Messages
FILL WATER TANK
: add water to the water tank.
FILL BEANS: add beans to the bean container.
RINSE: push the Rinse Button. Hot water will come
out of the Coffee Spouts and / or the ACS.
EMPTY GROUNDS or EMPTY TRAY: remove the
drawer, empty the used coffee container (ground
coffee) and the drawer (water). Replace all parts.
IMPORTANT: If you pull out the drawer at any other
time, you must empty the used coffee container and
drawer. Otherwise you will create an overflow of
used coffee. Never pull out the drawer during any
operation.
Always wait for COFFEE READY.
TRAY MISSING: replace the complete drawer
assembly.
BIN MISSING: The tray, which holds the used cof-
fee container, is missing. Make sure all four parts of
the drawer system (drawer, tray, used coffee con-
tainer and stainless steel grid) are inserted.
BEANCOVER MISSING: replace bean container lid.
Delayed Action Messages: In addition to COFFEE
READY the Z5/Z6 will display another message. You
can still brew beverages but you need to perform
these functions as soon as possible:
COFFEE READY plus…
... CAPPU RINSE: (see chapter G)
... CLEAN: run a 15 minutes tablet cleaning cycle
within the next few days. (see chapter R)
...
FILTER CHANGE: (see chapter P)
... DESCALE: (see chapter S).
R) Tablet Cleaning Cycle
The message COFFEE READY CLEAN will appear
after approx. 200 cups of coffee. This cleaning cycle
removes coffee oils inside the machine. Takes less
than 15 minutes.
Important: Only use special round cleaning tablet.
Impor
tant:
Do not inter
r
upt pr
ogram once started!
Fill water tank. Push and hold the Rinse Button.
TRAY GROUNDS EMPTY. You must remove the
drawer system for 20 seconds, even if it is empty.
After emptying replace all parts.
PRESS BUTTON.