Filter
Top Products
Installation
This appliance is designed to fit under worktops between 820 – 890mm in height, using one of two plinth plates to ensure
that the feet are concealed from view.
Installation under a kitchen worktop between 820-850 mm in height
Install the wine cooler as described on page 9. Extend the adjustable feet to bring the wine cooler up to the required height.
Then extend the plinth section up to a maximum of 101mm, and tighten the two screws on the front of the plinth section.
Installation under a kitchen worktop between 850-888 mm in height
Remove the two screws on the front of the plinth section and then remove the plinth section and replace with the alternative
plinth section supplied. Remove the two front adjustable feet and replace with the alternative feet supplied.
Install the wine cooler as described on page 9. Extend the adjustable feet to bring the wine cooler up to the required height.
Then extend the plinth section up to a maximum of 141mm, and tighten the two screws on the front of the plinth section.
10