Filter
Top Products
fig. 7
fig. 8
fig. 9
fig. 10
Reversing the door
It is possible to reverse the door on this appliance, if required.
To do so, follow the steps below:
1. Open the door and remove the screws (1) securing the
bottom hinge to the appliance(6). Support the door to
prevent it from falling.
2. Gently pull down the door (5) to remove it from the
top hinge and place on a padded surface to avoid the
risk of damage.
3. Separate the hinge pin (3) from the lower hinge (2) and
refit on the alternative lower hinge with the pin at the
left side.
4. Remove the upper hinge (4).
5. Pop out the cover caps on the left side and use them to
cover the screw holes on the right hand side.
6. Fit the alternative top hinge (7), included in the fittings,
on the left hand side.
7. Rotate the door 180º and relocate it on the top hinge.
8. Introduce the alternative lowerhinge into the door
and secure it to the appliance body using the screws
removed in step 1.
Please note:
Keep the spare hinge plate(s) to be able to reverse the door back
again.
1- Screws
2- Lower hinge
3- Hinge pin
4- Right upper hinge
5- Door
6- Cabinet
7- Left upper hinge
11