Filter
Top Products
12
Fast Automatic Heating of the Cooking Zones
This function permits fast heating up at the maximum power
level, followed by heating at the preset power level. The duration
of the automatic fast heating up period is preset and depends on
the selected power level.
To activate the heat-up function select the power level "
9 " and
then touch again the key ; the luminous point at the bottom
right side of the display will blink for 10 seconds. During these
10 seconds the desired power level shall be selected (between
1 and 8 ). After this time a beep sounds and the luminous
point remains fixed (not blinking), indicating that the heat-up
function is ON.
If the power level is "
0 " or " 9 ", the heat-up function is
cancelled.
If the heat-up function is activated, by pressing the key
the
duration of the heat-up function will be the duration of the
new power level. If the new power level is " 9 ", the function
is cancelled.
Cancelling the Heat-Up Function
The heat-up function can be cancelled:
– automatically (when the time expires) - a beep sounds, the
luminous point goes out, the power level of the heater remains
the selected power level;
– by the user - by pressing the key
the function is cancelled.
Heat-Up Function Time
Cooking zone
power level
1 2 3 4 5 6 7 8
Fast
heating time
1 min.
&
12 sec.
2 min.
&
44 sec.
4 min.
&
48 sec.
5 min.
&
28 sec.
6 min.
&
30 sec.
1 min.
&
12 sec.
2 min.
&
44 sec.
2 min.
&
44 sec.