CDA HVC 32 Cooktop User Manual


 
21
Mains Electricity Connection
Incorrect installation may be dangerous and the manufacturer can not be held responsible.
Warning! This appliance must be earthed The manufacturer declines all responsibility for any
problem caused by failure to observe this rule.
THIS APPLIANCE MUST BE CONNECTED TO THE MAINS SUPPLY BY A COMPETENT PERSON,
USING FIXED WIRING VIA A DOUBLE POLE SWITCH AND PROTECTED BY A SUITABLE FUSE. THIS
APPLIANCE IS NOT SUITABLE FOR CONNECTION TO A 13A PLUG OR SUPPLY.
We recommend that the appliance is connected by a qualified electrician, who is a member of the
N.I.C.E.I.C. and who will comply with the I.E.E. and local regulations.
The wires in the mains lead of this appliance are coloured in accordance with the following code:
Green & Yellow = Earth, Blue = Neutral, Brown = Live.
As the colours of the wires in the mains lead for the appliance may not correspond with the coloured
markings identifying the terminals connecting to the fuse spur, proceed as follows:
The wire which is coloured green and yellow must be connected to the terminal marked E (Earth) or
coloured green.
The wire which is coloured blue must be connected to the terminal marked N (Neutral), or coloured
black.
The wire which is coloured brown must be connected to the terminal marked L (Live), or coloured
red.
Note: Use a suitable fuse (16A minimum).
The mains cable must only be replaced by a qualified electrician or service engineer and must be of
equivalent or better rating (i.e. 1.5mm
2
, H05RR-F).
Assembly and electrical connection should be carried out by specialised personnel.
When installing this product we recommend you seek the help of another individual.