Filter
Top Products
48
Electrical installation
For your safety please read the following information:
IMPORTANT: The cooker must be installed in accordance with the manufacturer’s
instructions.
Incorrect installation, for which the manufacturer accepts no responsibility, may
cause damage to persons, animals and things.
General
– Connection to the mains must be carried out by qualified personnel in accordance
with current regulations.
– The appliance must be connected to the mains checking that the voltage corre-
sponds to the value given in the rating plate and that the electrical cable sections
can withstand the load specified on the plate.
– The appliance can be connected directly to the mains placing an omnipolar switch
with minimum opening between the contacts of 3 mm between the appliance and
the mains.
– The power supply cable must not touch the hot parts and must be positioned so
that it does not exceed 75°C at any point.
– Once the appliance has been installed, the switch must always be accessible.
– If the power supply cable is damaged it must be substituted by a suitable cable.
N.B. For connection to the mains, do not use adapters, reducers or branch-
ing devices as they can cause overheating and burning.
If the installation requires alterations to the domestic electrical system call an expert.
He should also check that the electrical system is suitable for the power absorbed by
the appliance.
IMPORTANT: this cooker must be connected to a suitable double pole control unit
adjacent to the cooker.
No diversity can be applied to this control unit.
The connection of the appliance to earth is mandatory.
The manufacturer declines all responsability for any inconvenience resulting from the
inobservance of this condition.