Filter
Top Products
11
WEEKDAY TIME OFF WEEKDAY TIME OFF
##:## #M
Description – The Weekday Time OFF function allows the user to set the required weekday turn OFF time.
WEEKEND TIMER WEEKEND TIMER
ON/OFF
Description – The Weekend Timer function allows the system to automatically turn ON at a specified time
and turn OFF at a specified time every weekend (Saturday - Sunday).
WEEKEND TIME ON WEEKEND TIME ON
##:## #M
escription – The Weekend Time ON function allows the user to set the required weekend turn ON time.
WEEKEND TIME OFF WEEKEND TIME OFF
##:## #M
Description – The Weekend Time OFF function allows the user to set the required weekend turn OFF time.
CLOCK SETUP CLOCK SETUP
ON/OFF
Description – The Clock Setup function allows the user to adjust (set and calibrate) the systems Real-Time-
Clock.
ADJUST SECONDS ADJUST SECONDS
DAY HH:MM:##
Description – The Adjust Seconds function allows the user to adjust (set) the systems Real-Time-Clock
Seconds placeholder.
ADJUST MINUTES ADJUST MINUTES
DAY HH:##:SS
Description – The Adjust Minutes function allows the user to adjust (set) the systems Real-Time-Clock
Minutes placeholder.
ADJUST HOURS ADJUST HOURS
DAY ##:MM:SS
Description – The Adjust Hours function allows the user to adjust (set) the systems Real-Time-Clock Hours
placeholder.
ADJUST DAY ADJUST DAY
### HH:MM:SS
Description – The Adjust Day function allows the user to adjust (set) the systems Real-Time-Clock Day
placeholder.
CLOCK CALIBRATION CONSTANT CLOCK CAL CONST
##
Description – The Clock Calibration Constant function allows the user to calibrate the systems Real-Time-
Clock (RTC). Each unit corresponds to approximately five seconds per month. Thus, if the RTC is running
five seconds slow per month then the Clock Calibration Constant needs to be increased by one.
Conversely, if the RTC is running five seconds fast per month then the Clock Calibration Constant needs to
be decreased by one.
UNITS UNITS
ENGLISH/METRIC
Description – The Units function allows the user to select English (oz, °F) or Metric (mL,°C) units of
measure.
DEFAULT VALUES DEFAULT VALUES
ARE YOU SURE ?
Description – The Default Values function allows the user to set all
system parameters back to their Factory Default Settings. This provides
a known (reference) configuration for troubleshooting purposes.
DEFAULT VALUES
COMPLETED