Filter
Top Products
7
English
XA311
Adjusting the fader
1. Press A-M button 4 and select “FAD”.
2. Turning the Rotary knob 3 clockwise
emphasizes the sound from the front speak-
ers; turning it counterclockwise emphasizes
the sound from the rear speakers.
*
The factory default setting is “0”. (Adjustment
range: F9 to R9)
3. When the adjustment is complete, press A-M
button 4 several times until the function
mode is reached.
Switching the Display
While pressing the BAND button 6, press the
DISP button $ to enter the clock display mode.
Main display ➜ Clock display ➜ Main display
Setting the Clock
1) While pressing the BAND button 6, press
the DISP button $ to enter the clock display
mode.
2) While pressing the BAND button 6, press
and hold the DISP button $ for 2 seconds or
more. This enables the clock editing mode.
*
The editable fields will be indicated when the dis-
play flashes.
3) To move between the hour and minute fields,
use the Up (hour) and Down (minute) buttons
1.
4) To store the clock setting, press the BAND
button 6.
Notes:
•
If you select another operation mode before complet-
ing the above procedure, the clock setting operation
will be canceled.
•
Removing the vehicle’s battery for a check or repair
will cause the clock to reset to 1:00. Set the clock
again if this happens.
Loading Tapes
Insert the cassette tape into the Cassette inser-
tion slot with the side on which the tape is
exposed facing the right. Playback starts auto-
matically.
*
When the end of the cassette tape is reached, the
auto reverse mechanism is activated and the other
side of the tape begins playing automatically.
Note:
•
Fully insert the cassette tape into the cassette inser-
tion slot.
Listening to a tape which is already loaded
Press the FUNC button 5 to select the tape
mode. Playback begins automatically.
Ejecting Cassette Tapes
Press the Eject button 9. The cassette tape is
ejected.
*
The radio mode is selected automatically 4 seconds
after ejecting the tape.
Fast-Forwarding and Rewinding
Use the FF button @ and REW buttons 0.
:Press this to fast-forward the tape.
:Press this to rewind the tape.
*
It is possible to listen to the radio during fast-forward,
rewind or search operations.
Switching to the Other Side of the
Tape
Press the PROG button ! both the FF button
@ and REW button 0 together at the same
time. Playback is switched automatically to the
other side of the cassette tape.
Tape Operation
Basic Operation