Creda GDW51 Cooktop User Manual


 
Care and Cleaning
18
COOKER FINISH
CLEANING METHOD
Vitreous Enamel
Hotplate, burner caps,
grill pan, oven base and rear,
inside of grill compartment,
inside of doors, control panel.
Cloth wrung out in hot soapy water.
Stubborn stains can be removed with a
cream paste, liquid cleaner or by
rubbing with fine steel wool soap pads.
Check that the cleaning agent is
approved by the Vitreous Enamel
Development Council.
Paint
Plinth, Fascia bottom trim,
side panels, Lid trim, Rear end
caps (models with hotplate
lid)
Wash with a cloth wrung out in hot
soapy water only.
DO NOT USE ABRASIVES.
Aluminium
Hotplate burner bodies
Similar to paint cleaning above. Use a
nylon brush to remove any cleaning
materials, water or dirt from the
hotplate burners.
Chromium Plating
Oven shelves, grill pan grid,
grill pan handle support
Wipe with a cloth wrung out in hot
soapy water.
A fine steel wool soap pad e.g. Brillo,
Ajax, or a chrome or stainless steel
cleaner may be used.
Plastic
Grill pan handle, door
handles, control knobs
NOTE: To ensure rapid lighting of the hotplate burners every time they
are used, the electrodes must be kept clean and dry. Remove any food
spillage or cleaning materials from the electrode using a small nylon
brush such as a tooth brush.
Wipe with a cloth wrung out in hot
soapy water.
Stubborn stains can be removed with
a cream cleaner.
Glass
Lid if fitted
Door fronts
As for vitreous enamel cleaning
above. Polish with a clean dry cloth or
kitchen towel.