Filter
Top Products
24
Installation Instructions
After installation, check for gas soundness. The supply pressure can be
checked at the grill injector. Access to the injector is by first removing
the baffle at the front of the grill fastened by two screws. Then remove
the fastening screw on the right hand side of the burner and slide the
burner off the injector. Ensure that the grill burner is correctly located
under the fixing screw on reassembly.
Fit the battery. Fit the hotplate burner bodies, enamelled discs and pan
supports. Referring to the instructions for use where
necessary.
1. Check that the hotplate burners ignite correctly and burn with a
steady flame. Check for a steady flame on the low setting.
2. Check that the grill burner ignites correctly and burns with a steady
flame.
3. Check that, with the top oven set to mark 8, the burner ignites
correctly and burns with a steady flame. Leave the oven full on with
the door closed for 10 minutes and check that when the control is
turned to mark 1 the flame reduces.
4. Check that with the oven set to mark 9, the burner ignites at low rate
and then increases to full rate within 60 seconds. Leave the oven full
on with the door closed for 10 minutes, and check that when the
control is turned to the ‘E’ setting that the flame reduces.
Instruct the user on the operation of the cooker.
Operational
Checks