Filter
Top Products
4
FEATURES AND BENEFITS
1. Cover
Just press on. Tightfitting
seal resists leakage.
2. Measured Pour Lid
Allows you to measure
and add ingredients with-
out removing the cover.
3. 50-oz. Glass Jar
Has a unique, sturdy,
widemouth design.
4. Leak-proof Rubber Gasket
(not shown)
Holds the glass jar snugly in
position for safe
operation.
5. High-Quality Cutting
Assembly with Patented
Stainless Steel Blades
Is strong enough for all
blender tasks, including
tough jobs, from ice
crushing to chopping
delicate herbs.
6. Locking Ring
Is self-aligning so that the
glass blender jar slides
easily into position.
7. Count-Up
™
Timer
Five-minute timer times your recipes for perfect results.
8. Push-Button Controls
a. On/Off Buttons
b. High and Low Buttons
Choose High or Low speed to blend the ingredients to the desired
consistency. Red LED lights will indicate which speed you are using.
c. Pulse Button
Allows you to pulse at High or Low speeds, so you can
blend ingredients only as much as needed.
d. Ice Crush Button
Press on and begin crushing. This button is preset to the best speed
for crushing ice.
9. Heavy-Duty Motor Base
Is so sturdy and stable, it will not “walk” on your counter –
even during ice crushing!
10. Slip-Proof Feet (not shown)
Prevent movement during use and prevent damaging marks on
countertops or tables.
11. Cord Storage (not shown)
Keeps countertop safe and neat by conveniently storing
excess cord.
USE AND CARE
ASSEMBLY
To use your Cuisinart
®
SmartPower
Premier
™
600-Watt Blender, begin by
assembling the blender jar.
1. Turn the blender jar (a) upside down,
and place it flat on a sturdy surface.
2. Position the rubber gasket (b) on the
round opening on the bottom of the
blender jar.
3. Turn the cutting assembly (c) upside
down, and place the blade end in the
blender jar opening.
Note: Blades are sharp…
handle carefully.
4. Secure the rubber gasket and cutting
assembly into position by placing the
smaller opening of the locking ring
(d) on top of the cutting assembly.
Engage threads by twisting the
locking ring clockwise until
tightened. Make sure locking ring
is tightly fastened to blender jar.
Once assembled, turn the blender
jar right-side up.
5. Push the cover onto the top of the blender jar. Push the measured
pour lid into the cover.
6. Place the blender jar on the motor base so that the jar markings are
facing you and the handle is positioned to one side.
7. Plug in power cord. Your blender is now ready to be used.
(d)
(a)
(b)
(c)
Note: Blades are sharp...
handle carefully.
2.
1.
3.
5.
6.
7.
8.
8d.
8c.
8b.
9.
8a.