Filter
Top Products
16
17
before yoU Call for serviCe
PROBLEM POSSIBLE CAUSE SOLUTION
1. Part or all of Microwave In-
A-Drawer
™
does not
operate.
• Power cord of Microwave In-A-Drawer
™
is
not completely connected to the electrical
outlet.
• Power outage.
• Fuse/circuit breaker at home doesn’t work.
• Microwave In-A-Drawer
™
is in Demo
Mode.
• Make sure the power cord is tightly connected
to the outlet.
• Check house lights to be sure. Call your local
electric company for service.
• Replace the fuse or reset the circuit breaker.
• See page 14 for how to cancel Demo Mode.
2. Food in microwave is not
heated.
• No power to the appliance.
• Drawer controls improperly set.
• Drawer is in Demo Mode.
• See SOLUTION for PROBLEM 1.
• Check if the controls have been properly
set.
• See page 14.
3. Microwave In-A-Drawer
™
light does not work.
• Light bulb is loose or burned out. • Call for service.
4. Touch controls will not
operate.
• Control Lock is on. • See page 13 to unlock.
5. Display ashes.
• Power failure. • Press the CLEAR pad and reset the clock. If
the Microwave In-A-Drawer
™
was in use, you
must reset the cooking function.
6. Steam from the vent.
• During microwaving, steam may come
from the right side of the vent.
Please check the following before calling for service. It may save you time and expense.