Filter
Top Products
6
7
before operaTing
Before operating your new Microwave In-A-Drawer
™
make sure you read and understand this operation
manual completely.
• Before the Microwave In-A-Drawer
™
can be used,
follow these steps:
1. Plug in the Microwave In-A-Drawer
™
.
ENJOY
YOUR
MICRO-
WAVE
TOUCH
CLEAR
AND
TOUCH
CLOCK
will appear.
2. Touch the STOP/CLEAR pad.
:
will appear.
3. Set clock.
TO SET THE CLOCK
1. Touch the TIMER/CLOCK pad and number 2.
2. Touch the number pads for correct time of day and
touch the TIMER/CLOCK pad again.
This is a 12 hour clock. If you attempt to enter an incorrect
clock time,
ERROR
will appear in the display. Touch the
STOP/CLEAR pad and re-enter the time.
• If the electrical power supply to your Microwave In-A-
Drawer
™
should be interrupted, the display will intermittently
show
ENJOY
YOUR
MICRO-
WAVE
TOUCH
CLEAR
AND
TOUCH
CLOCK
after the power is reinstated. If this
occurs during cooking, the program will be erased. The time
of day will also be erased. Simply touch the STOP/CLEAR
pad and reset the clock for the correct time of day.
NOTE:
• The Microwave In-A-Drawer
™
can be programmed
with the drawer open except for START/EASY
MINUTE.
STOP/CLEAR
Touch the STOP/CLEAR pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the Microwave In-A-Drawer
™
temporarily during
timed cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice for timed
cooking.
OPEN OR CLOSE DRAWER
Always press the OPEN or CLOSE pad on the control panel to
open or close the Drawer.
Do not push or pull the Drawer by hand, except in case of
emergency, such as a power failure. If necessary, push or
pull slowly.
TIMER
1. Touch the TIMER/CLOCK pad and number 1.
2. Enter time.
3. Touch the TIMER/CLOCK pad again.
To cancel timer, touch the
STOP/CLEAR.