Danby DMW1400W Microwave Oven User Manual


 
12
2. Auto Defrost By Weight:
Microwave Oven automatically calculates defrost time based on weight entered.
Please refer to the below chart for details.
Press Key Pad Defrost Program Food Category Weight Scope
Once dEF 1 Chicken 0.1 ~ 6.0lbs.
Twice dEF 2 Meat 0.1 ~ 4.0lbs.
Three Times dEF 3 Fish 0.1 ~ 3.0lbs.
a) Press the "Auto Defrost" key, the display will show the available defrost programs.
Press the "Auto Defrost" key repeatedly to scroll through the available programs.
b) Press the number keys to enter the weight of the food in lbs. Example, 0.8lb, press "8"
or 2.5lb, press "2" & "5". (each time a key is depressed, a signal/beep will sound) If a
wrong weight is entered or you want to enter a new weight, press the "Stop/Clear" key
and repeat steps " a & b". The (red) indicator light for "Weight" & "lb." along with the
weight entered will appear in the display.
c) Press the "Start" key to start the defrost program. The (red) indicator light (Defrost)
"Weight" & "lb" will go off and the (red) indicator light (Defrost) "Time" will begin to flash.
The microwave oven automatically calculates defrost time (based on food weight and
defrost program selection) and is shown in the display. The timer countdown begins as
soon as the "Start" key is pressed. At the end of the program, a signal/beep will sound
(5 times) indicating the program is finished.
3. One Stage Microwave Cooking:
Allows you to cook using one power level only.
NOTE: Unless a lower power level is selected, the microwave oven is programmed to
operate at full (100%) power.
Please refer to the below chart for details. (PL = Power Level)
Press Key Pad Display Cooking Power Level
Once PH1 (Phase/Stage 1 Cooking)
Twice PL9 100%
Three Times PL8 80%
Four Times PL7 70%
Five Times PL6 60%
Six Times PL5 50%
Seven Times PL4 40%
Eight Times PL3 30%
Nine Times PL2 20%
Ten Times PL1 10%
Eleven Times PL0 0%
a) Press "Power" key repeatedly to select cooking power level.
b) Enter cooking time by pressing number keys in sequence.
Example: if you want a cooking time of 13:40, press 1,3,4,0.
c) Press the "Start" key. The "Stage 1" (red) indicator light will flash and the timer
countdown begins. At the end of the program, a signal/beep will sound (5 times)
indicating the program is finished.