Filter
Top Products
INSTALLATION
12
2. Snap the central baffle filter panel into the place so the both rails engage with side pins on both
s
ides of hood. Drive 2 screws (1 on each side ) through baffle filter panel hole to hood. See
Fig. 12.
3. Snap four-side baffle trim to hood (4 pins engage each side trim). The baffle trims are supplied
separately (for IVS52 only). See Fig. 13.
4. Install all baffle filters as per Use and Care Manual instructions.
Fixing screw location
Fig. 12
F
ig
. 13
Baffle filter panel
Baffle trim