Filter
Top Products
Page 2
Congratulations on the purchase of this quality appliance.
Please read these instructions carefully before using the product. This book will provide
you with information on how to operate and care for your appliance in order that you gain
the maximum benefit from it and enjoy many years of trouble free use.
Introduction
Unpacking
• Please ensure that packaging material is disposed of in a responsible manner.
• Plastic bags should be cut up to prevent children playing with them and accidentally
suffocating.
• If the appliance is damaged in any way, do not use it. Report the damage to your
dealer, who will take the necessary corrective action.
1. Remove the hinge cover screw. Insert a blade or
small flat screw driver into the side groove of the
hinge cover and pry it loose. Remove the hinge
cover.
2. Turn the top hinge fastener 3 to 4 times in an
anti-clockwise direction and disconnect the wir-
ing harness
3. Remove the hinge by lifting the front and pulling
it free. Be sure to hold the door securely as the
top is now no longer secured.
4. Lift the door free of the bottom hinge pin.
Removing the refrigerator door
The refrigerator door has 1 earth wire to be unscrewed
at the top hinge.
Otherwise the procedure is the same as described
above.
Removing the freezer door
Before installation
Measure the width of the kitchen entrance through which the unit must pass.
The refrigerator measures 1790mm x 903mm x 735mm. (H x W x D incl. handles.)
If the unit will not pass easily through the kitchen entrance, without risking damage, then
either the kitchen door or those of the refrigerator or both should be removed to allow
free passage. Once the unit is in position the doors can be re-fitted.