Filter
Top Products
Page 20
Egg tray
You can install the egg holder to the desired
door or body shelf.
Never store the egg holder in the
freezer compartment .
Sliding Body Shelves
The sliding body shelves can be removed by
lifting them slightly from the front, the
shelves can then be moved back and forth.
There are 2 stop points, the first allows for
the shelf to be pulled to a certain point in
order that foods placed at the back of the
shelf may be easily accessed; when the
shelf is pulled and slightly lifted upwards
when it reaches the second stop point, the
body shelf will be released.
The shelf should be held firmly from the
bottom in order to prevent the shelf from
tipping over.
The body shelf is held in place by the rails
on the sides of the refrigerator body.
The shelf may be placed on one of the lower
or upper level rails as required. The body
shelf should be pushed backwards gently
until it is completely seated.
Crisper
The crisper of your refrigerator has been
designed to help keep vegetables fresh
without loosing their humidity. Cold air
circulates around the crisper for this
purpose. Remove the door shelves that align
with the crisper before removing the
crispers. You can remove the crispers as
illustrated in the figure.
Chiller compartment
Chiller compartments help prepare foods,
that you intend to freeze, to be ready for
freezing. You can also use these
compartments to store food at a temperature
a few degrees below the fridge
compartment.
You can increase the inner volume of your
refrigerator by removing any of the chiller
compartments. To do this, simply pull the
compartment towards yourself; the
compartment will stop when it reaches the
stopper. The compartment will be released
when you lift it about 1 cm and pull it towards
yourself.