Filter
Top Products
Page 4
Flexible hose - Not supplied.
Any hose that is used to connect the stove to the gas system shall comply with SANS
1156-2 or BS 3212.
Temporary installation.
Flexible hose connection from the gas appliance to the cylinder can be made by the user.
Ensure that pipe clamps are tightened correctly and are of good quality.
Gas cylinder - Not supplied.
For best results we recommend that gas cylinders with a minimum capacity of 19kg be
used.
Regulator - Not supplied.
A 2,8 kPa LPG gas regulator which complies with SANS 1237 must be used.
Permanent installation.
The appliance may only be installed by a Qualified Gas Fitter who is registered with the
LPGSASA. (Liquid Petroleum Gas Association of Southern Africa) All registered Gas
Fitters are issued with an identity card which carries their registration number. Make a
note of this on the back page of this book
The Gas Fitter should also provide you with a written certificate after completion of the
work. Failure to comply with the above will render the warranty invalid.
Before the installer hands over the installed appliance be sure that you fully understand:
a) The position of the isolation or shut-off valve in the gas supply line to the appliance.
b) The requirements for safe operation of the appliance
Note.This appliance is supplied ex-factory with jets and air settings for use with
LPG gas only.
Safety compliance with local requirements.
Installers details to be filled in below
INSTALLERS NAME. INSTALLERS REGISTRATION
NUMBER.
HAVE YOU RECEIVED A
WRITTEN CERTIFICATE?