Filter
Top Products
12
CLEANING THE CAPPUCCINO NOZZLE
1. Unscrew the cappuccino nozzle by turning gently (fig. 17).
2. Clean the cappuccino nozzle carefully in hot water.
3. From time to time, use a pin to clean the holes in the cappuccino nozzle
(fig. 18).
IMPORTANT:
NEVER unscrew the water tank cap or remove the filter-holder when the
machine is switched on, as the boiler is under pressure.
In order to check whether there is pressure in the water tank:
• Switch the machine off.
• Remove the plug from the wall socket.
• Turn the steam knob slowly counter-clockwise.
• If steam escapes from the tube, then the water tank is still under
pressure.
• Place a receptacle under the steam tube.
• Open the steam knob so that the residual steam can escape.
• When all the steam has escaped from the tube, close the steam knob by
turning it clockwise.
At this point, the water tank cap and the filter-holder can be removed.
PERIODIC CLEANING AND MAINTENANCE
• Before carrying out any cleaning or maintenance operations, switch the
machine off, remove the plug from the socket and leave the machine to
cool.
• Do not use solvents, detergents or abrasive products to clean the
machine. A soft damp cloth is sufficient.
• Clean the filter-holder, filter and drip tray regularly.
• Do not wash the machine - remember that it is an electrical appliance.
• Never wash components or accessories in a dishwasher.