Filter
Top Products
9
USE OF THE MACHINE
THIS MACHINE IS FOR HOUSEHOLD USE ONLY
A) Before making espresso/cappuccino for the first time, wash all accessories
(filter-holder, measuring spoon, filter, carafe, adaptor and cappuccino nozzle)
with detergent and warm water, then rinse thoroughly.
B) FLUSH OUT THE WATER TANK
1. Always switch the machine off and unplug before filling the water tank.
2. Use the glass carafe (I) to fill the water tank (see fig. 1)
3. Unscrew the water tank cap by turning counterclockwise (B). FILL THE
TANK WITH WATER (FIG. 2), BY USING THE CARAFFE (FIG. 1).
4. Close the water tank cap securely by turning clockwise.
5. Plug the appliance into the wall socket. (Remember safety instructions).
6. Put the filter (M) in the filter holder (L). (See fig. 3).
7. To attach the filter holder to the machine, place the filter holder underneath
the boiler nozzle (see fig. 4), aligning the handle with the impressed
on the side of the machine (fig. 5). Push the filter holder upwards and turn
it to the right until secure. (The handle doesn't have to necessarily be
straight when it is attached to the machine).
8. Place the carafe under the filter holder. Ensure that the spout is aligned
with the hole in the carafe lid (see fig. 6).
9. Turn the lever (O) to "LIGHT" position.
10. Check that the steam knob (C) is closed by turning clockwise until
tightened.
11. Press switch (P) to on. The switch will light. (If the switch does not light,
check to see if it is plugged in).
12. In about 2 minutes hot water will begin to flow into the carafe. when the
water is done flowing turn the machine off.
C) FLUSHING THE STEAM TUBE AND CAPPUCCINO NOZZLE
1. Fill carafe to steam line - directly above the 2 cup line.
2. Pour into water tank and secure cap.
3. Turn machine on.
4. After hot water has filled to the 2 cup line in carafe, turn the flow regulator
to cappuccino (steam symbol).
5. Remove carafe (remove lid) and place under the steam tube (D).
6. Open steam knob slowly (turn counterclockwise). When steam no longer
comes out of nozzle, close steam knob.
7. Turn switch off.
▼