Filter
Top Products
24
A
U
T
O
Figure 14
Figure 15
ELECTRONIC CLOCK (fig. 13)
The programmer is equipped with an
electronic clock with lighted numbers
which indicates hours and minutes.
Upon immediate connection of the
oven or after a power cut, three zeros
will flash on the programmer panel.
To set the hour it is necessary to push
the button and then the or
button until you have set the exact
hour (fig. 13).
Another way is to simultaneously push
the two buttons and at the
same time push the or button.
Nota: Changing the hour button
deletes any cooking program.
ELECTRONIC TIMER
The timer program consists only of a
buzzer which may be set for a
maximum period of 23 hours and 59
minutes.
If the AUTO flashing push the
button.
To set the time, push the button
and the or until you obtain the
desired time in the panel (fig. 15).
Having finished the setting, the clock
hour will appear on the panel and the
symbol will be lighted.
The countdown will start immediately
and may be seen at any moment on
the panel by simply pressing the button
.
At the end of the time, the symbol
will be switched off and an intermittent
buzzer will go off; this can be stopped
by pressing any of the buttons.
SETTING THE FREQUENCY
OF THE AUDIBLE SIGNAL
The selection from 3 possibilities of
sound can be made by pressing the
button.
NORMAL COOKING
WITHOUT THE USE OF
THE PROGRAMMER
To manually use the oven, that is, without
the aid of the programmer, it is necessary
to cancel the flashing AUTO by pushing
the button (
AUTO
will be switched off
and the symbol will go on - Fig. 14).
Attention: If the AUTO symbol is steady
a cooking program has already been
programmed, by pushing the button
you have cancelled of the program and
the switched to manual.
If the oven is switch on, you must switch
off manually.