Filter
Top Products
25
A
U
T
O
A
U
T
O
Figure 16
Figure 17
AUTOMATIC OVEN
COOKING
To cook food automatically in the oven,
it is necessary to:
1.Set the length of the cooking time
2.Set the end of the cooking time
3.Set the temperature and the oven
cooking program.
These operations are done in the
following way:
1.Set the length of the cooking time by
pushing the button and the
button to advance, or to go
back if you have passed the desired
time (fig. 16). The AUTO and the
symbol will be on.
2.Set the end of the cooking time by
pressing the button (the cooking
time already added to the clock time
will appear), and the button (fig.
26); if you pass the desired time you
may get back by pushing the
button.
After this setting, the symbol will
go off. If after this setting, the AUTO
flash on the panel and a buzzer gives
off, it means there was an error in
the programming.
In this case, modify the end of
cooking time or the cooking time
itself by following again the above
mentioned instructions.
3.Set the temperature and the cooking
program by using the switch and
thermostat knobs of the oven (see
specific chapters).
Now the oven is programmed and
everything will work automatically, that
is the oven will turn on at the right
moment to end the cooking at the
established hour.
During cooking, the symbol remains
on.
By pushing the button you can see
the time that remains until the end of
cooking.
The cooking program may be cancelled
in any moment by pushing .
At the end of the cooking time the
oven will turn off automatically, the
symbol will turn off, AUTO will flash
and a buzzer will sound, which can be
turned off by pushing any of the bot-
tons.
Turn the switch and thermostat knobs
to zero and put the programmer onto
“manual” by pressing the button.
Attention: A power cut makes the
clock go to zero and cancels the set
programs.
After a power cut, three zeros will flash
on the panel.