Filter
Top Products
ENAMELLED PARTS
✓ All the enamelled parts must be cleaned with a sponge and soapy water only or other
non-abrasive products.
✓ Dry preferably with a soft cloth.
✓ If acid substances such as lemon juice, tomato conserve, vinegar etc. are left on the
enamel for a long time they will etch it, making it opaque.
STAINLESS STEEL SURFACES
✓ Stainless steel parts should be rinsed with water and dried with a microfibre or soft
cloth.
✓ For persistent dirt, use specific non-abrasive products available commercially or a
little hot vinegar.
GAS TAPS
✓ Periodic lubrication of the gas taps must be carried out by specialist personnel only.
✓ In the event of operating faults in the gas taps, call the Service Department.
CONTROL KNOB/S
✓ The control knob/s may be removed for cleaning but care should be taken not to
damage the seal.
19