Filter
Top Products
13
PROGRAM FOR AUTOMATIC
SWITCHING OFF OF ONE COOKING
ZONE
This function permits to set a timer from
1 to 99 minutes for automatic turning
OFF of one cooking zone only.
Note: It is not possible to set this pro-
gram for both the cooking zones.
With the touch control switched ON:
– Press the timer keys or ; a beep
sounds and the timer display shows
“ 00 ”. The displays of the cooking
zones show " " (timer).
– Within 10 seconds, select the cooking
zone to be programmed by using the
cooking zone keys or ; a beep
sounds and the led next to the heater
display start blinking.
– Set the disired power level by using
the cooking zone keys or ; the
led next to the heater display is stably
lit (not blinking).
– Within 10 seconds, set the timer
by using the timer keys or to
increase or reduce the value (when
touching the keys, the led next to the
heater display is blinking). If the select-
ed time is “ 00 ”, the timer is switched
off automatically after 10 seconds.
– The countdown starts 10 seconds
after the last selection. The time can
be changed at any time by using the
timer keys; the countdown stops and
then the timer changes the stop time.
Now the program for automatic switch-
ing off is complete.
At the end of the countdown the cook-
ing zone will switch off automatically,
an acoustic signal (beep) will sound (for
one minute only), “ 00 ” will flash on
the timer display and the led next to the
heater display will blink.
Press any button of the touch control to
reset the timer.
Note: The program for automatic switch
off can be cancelled at any time by
resetting the timer to “ 00 ”).
OR
OR
OR