Filter
Top Products
15
ERROR CODE ON THE DISPLAY/S
If an error message appears on the
display/s (the display/s show/s “ F ” and
another character alternating - e.g. “ F ”
and “ A ”, “ F ” and “ 0 ”, .....) :
1. Disconnect the cooktop from the
mains.
2. Reconnect the cooktop and turn it on.
3. Wait for about two minutes and if the
problem does not appear the cooktop
can be used.
4. If the problem does not disappear
repeat step from 1 to 3.
5. If the problem continues, disconnect
the cooktop from the mains and con-
tact your Authorised Service Centre.
Important: In the case of error message
“ F ” and “ L ” or “ F ” and “ ” see
notes at page 6.
DISPLAY/S OFF OR NOT CORRECTLY
OPERATING
If a display or the displays are only
partially lit or not lit.
1. Switch off the cooktop and discon-
nect it from the mains.
2. Reconnect the cooktop and turn it on.
3. Wait for about two minutes and if the
problem does not appear the cooktop
can be used.
4. If the problem does not disappear
repeat step from 1 to 3.
5. If the problem continues, disconnect
the cooktop from the mains and con-
tact your Authorised Service Centre.