Filter
Top Products
13
ብ
L
Fig. 4.4
Fig. 4.5
H
Fig. 4.6
OVEN DOOR
The internal glass of the oven door can be easily removed for cleaning by unscrewing
the two lateral fixing screws (fig. 4.3).
Fig. 4.3
Do not store flammable material in the oven.
REPLACING THE OVEN LIGHT
Before any maintenance is started involving electrical parts of the appliance, it must be
disconnected from the power supply.
– Let the oven cavity and the broil burner cool down;
– Switch off the electrical supply;
–Remove the protective cover;
– Unscrew and replace the bulb with a new one suitable for high temperatures (300°C-
570°F) having the following specifications: 120V 60 Hz, 15W, E14
– Refit the protective cover
NOTE: Oven bulb replacement is not covered by your guarantee
REMOVING THE OVEN DOOR
To facilitate oven cleaning, it is possible to remove the door.
Please follow the instructions carefully:
– Open the door completely.
– Push down the lever “L” and, keeping it in this position, slowly close the door in
order to block the hinge (fig. 4.4).
–Grip the door (as indicated in fig. 4.5) and, while closing it, release the two hinges as
shown in fig. 4.6.
– Rest the door on a soft surface.
DOOR ASSEMBLY
– Grip the door with your hands placed near the hinges and raise the levers “H” with
your forefingers (fig. 4.6)
– Insert the hinges in their position until levers “H” are hooked.
– Open the door completely to obtain the release of levers “L”.