Filter
Top Products
34
AUTOMATIC OVEN COOKING
To cook food automatically in the oven, it is
necessary to:
1. Set the length of the cooking period.
2. Set the end of the cooking time.
3. Set the temperature and the oven co-
oking program.
These operations are done in the following
way:
1. Set the length of the cooking period
by pushing the
button and the
button
to increase, or to de-
crease if you have passed the desired
time (g. 36). The AUTO and the
symbol will illuminate.
2. Set the end of the cooking time by pres-
sing the
button (the cooking time
already added to the clock time will ap-
pear), and the
button (g. 37); if
you pass the desired time you may get
back by pushing the
button.
After this setting, the symbol
will disappear. If after this setting, the
AUTO ashes on the display and a
buzzer sounds, it means there was
an error in the programming, that is
that the cooking cycle has been su-
perimposed on the clock. In this case,
modify the end of cooking time or the
cooking period itself by following again
the above mentioned instructions.
3. Set the temperature and the cooking
program by using the switch and ther-
mostat knobs of the oven (see specic
chapters).
Now the oven is programmed and
everything will work automatically, that is
the oven will turn on at the right moment
to end the cooking at the established hour.
During cooking, the
symbol remains
illuminated.
By pushing the button you can see the
time that remains until the end of cooking.
The cooking program may be cancelled
at any time by pushing
.
At the end of the cooking time the oven will
turn off automatically, the
symbol will
turn off, AUTO will ash and a buzzer will
sound, which can be turned off by pushing
any of the buttons except the
/
buttons.
Turn the switch and thermostat knobs to
zero and put the programmer onto “ma-
nual” by pressing the
button.
Attention: After a power cut the clock re-
sets to zero and cancels the set programs.
After a power cut, three zeros will ash on
the display.
Figure 36 Figure 37