Filter
Top Products
Juice Extractor: Figure 11
1) Use the juice extractor for making juice
from fruits and vegetables.
2) Parts:
A) Stomper
B) Lid
C) Strainer
D) Inner Bowl
3) Fit the detachable drive shaft and bowl
onto power unit.
4) Lock the strainer into the inner part of
the bowl. Fit the inner bowl into the
food processors main bowl.
5) Place the attachment lid onto the bowl,
turn it clockwise until it locks and the
feed tube sits over the handle.
6) Cut the food into small pieces to fit the
feed tube.
7) Switch on the food processor and
push the food down evenly with the
stomper. Never put your fingers in the
feed tube. Process fully before adding
more.
8) After adding the last piece, let the
machine run for 20 seconds to extract
all of the juice from the strainer.
9) Note: If the food processor vibrates,
switch it off and empty the strainer.
The food processor will vibrate if the
pulp becomes unevenly distributed.
USING THE ATTACHMENTS (cont)
Figure 11
A
B
C
D