Filter
Top Products
11
Proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press < or > (g. 9) until “Cup warmer” is displayed;
3. Press the OK button: “Enable?” or “Disable?” will be
displayed
4. Press the OK button to enable or disable the cup warmer
(“Cup warmer” “Enabled” on the display indicates the fun-
ction is enabled)
5. Press the MENU/ESC button to exit the menu.
Warming the cups keeps the coee hot.
Energy saving
Use this function to enable or disable energy saving.
When enabled, the function reduces energy consumption in
compliance with European regulations.
To disable (or enable) energy saving, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press < or > (g. 9) until “Energy saving” is displayed;
3. Press the OK button. “Disable?” is displayed (or “Enable?” if
the function has been disabled);
4. Press the OK button to disable (or enable) energy saving
mode;
5. Then press the MENU/ESC button to exit the menu.
When the function is active, if the machine is not used for some
time, “Energy saving” is displayed.
Please note!
• When in energy saving mode, a few seconds elapse before
the rst coee, cappuccino or milk based coee is delivered
as the appliance must heat up again.
• To prepare any drink, press any button to exit energy sa-
ving, then press the button corresponding to the drink you
want to make.
• If the milk container is inserted, “Energy saving” is not
activated.
Setting the temperature
To modify the temperature of the water used to make the coee,
proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press < or > (g. 9) until “Set temperature” is displayed;
3. Press the OK button;
4. Press < or > until the required temperature (●=low;
●●●●=maximum) is displayed;
5. Press the OK button to conrm;
6. Then press the MENU/ESC button to exit the menu.
Setting water hardness
For instructions on setting water hardness, see page 20.
Setting the language
To modify the language of the display, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press < 4 times until “Set language” is displayed;
3. Press the OK button;
4. Press < or > until the required language is displayed;
5. Press the OK button to conrm;
6. A message conrming the language installed is displayed;
7. Then press the MENU/ESC button to exit the menu.
Beep
This enables or disables the beep emitted by the appliance whe-
never a button is pressed or an accessory is inserted/removed.
To disable or re-enable the beep, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press < or > (g. 9) until “Beep” is displayed;
3. Press the OK button: “Disable?” is displayed (or “Enable?” if
disabled);
4. Press the OK button to enable or disable the beep;
5. Press the MENU/ESC button to exit the menu.
Default values (reset)
This resets all menu settings and programmed quantities back
to the default values (with the exception of the language which
remains as set).
To reset the default values, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press < or > (g. 9) until “Default values” is displayed;
3. Press the OK button;
4. “Conrm?” is displayed;
5. Press the OK button to conrm and exit.
Statistics function
This displays statistics relating to the machine. To display, pro-
ceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press < or > (g. 9) until “Statistics” is displayed;
3. Press the OK button;
4. Press < or > (g. 9) to verify:
- how many coees have been made;
- the total number of cappuccinos and milk based coees
made;
- the total number of litres of water delivered.
- how many times the machine has been descaled.
- how many times the water softener lter has been
replaced.
5. Press the MENU/ESC button twice to exit the menu.