Filter
Top Products
12
CHANGING THE MENU SETTINGS
Setting the language
To modify the language on the display, proceed
as follows:
1. Press the P icon to enter the programming
menu;
2. Press the or icon until “Set language”
is displayed;
3. Press the OK icon;
4. Press the or icon until the required
language is displayed;
5. Press the OK icon to conrm(or the ESC
icon to cancel the operation);
6. Press the ESC icon to exit the menu.
Setting the clock
To adjust the time on the display, proceed as
follows:
1. Press the P icon to enter the programming
menu;
2. Press the or icon until “Adjust time” is
displayed;
3. Press the OK icon: the hours flash on the
display;
4. Press the or icon to change the
hours;
5. Press the OK icon to conrm(or the ESC
icon to cancel the operation): the minutes
flash on the display;
6. Press the or icon to change the
minutes;
7. Press the OK icon to conrm(or the ESC
icon to cancel the operation);
8. Press the ESC icon to exit the programming
menu.
Setting auto-start time
You can set the auto-start time in order to
have the appliance ready at a certain time (for
example in the morning) so you can make coffee
immediately.
1. Press the P icon to enter the programming
menu;
2. Press the or icon until “Auto-start
disabled” is displayed; “Enable?” is displayed
and the hours flash on the display;
3. Press the OK icon: the hours flash on the
display;
4. Press the or icon to change the
hours;
5. Press the OKicon toconrm:the minutes
flash on the display;
6. Press the or icon to change the
minutes;
7. Press the OK icon to conrm: “Auto-start
Enabled?” is displayed;
8. Press the ESC icon to exit the menu: a symbol
appears next to the clock to indicate that
auto-start has been programmed.
To deactivate the function:
1. Press the P icon to enter the programming
menu;
2. Press the or icon until “Auto-start
Enabled?” is displayed;
3. Press the OK icon: the hours flash on the
display;
4. Press the ESC icon. This deactivates the
function and the symbol disappears from
the display.
5. Press the ESC icon to exit the menu.
Information : To activate this function, the
time must have been set previously.
Setting the temperature
To modify the temperature (low, medium, high)
of the water used to make the coffee, proceed
as follows:
1. Press the P icon to enter the menu;
2. Press the or icon until “Temperature”
is displayed;
3. Press the OK icon;
4. Press the or icon until the required
temperature (low, medium or high) is
displayed;
5. Press the OK icon to conrm(or the ESC
icon to cancel the operation);
6. Press the ESC icon to exit the menu.
Setting auto-off
Information: The appliance is set to switch
automatically to stand-by if not used for 30
minutes. The time can be changed so that the
appliance switches off after 1 or 2 hours.
1. Press the P icon to enter the menu;
2. Press the or icon until “Auto-off” is
displayed;
3. Press the OK icon;
4. Press the or icon until the required