Filter
Top Products
16
Making cappuccino
1. After attaching the milk container, place
frothed milk regulator (B1) on lid to position
2 for CAPPUCCINO(g. 28). The quantity
of froth can be adjusted by moving the
regulator towards number 2 for a denser
froth.
Moving it towards number 1 obtains a less
dense froth.
2. Press the CAPPUCCINO icon (g.29). The
message “Cappuccino... Jug selector in
position: 1” appears . After a few seconds,
frothed milk flows out of the milk spout into
the cup below.
The milk will stop automatically and delivery
of coffee will begin.
Information! If during delivery you want to
stop preparing milk, press the CAPPUCCINO icon
or interrupt preparation of the coffee by pressing
the icon.
Making Italian macchiato
1. After attaching the milk container, place
frothed milk regulator (B1) on lid to position
2forITALIANMACCHIATO(g.28)
2. Press the ITALIAN MACCHIATO icon (g.
30). The message “Macchiato... Jug selector
in position: 2” appears.
After a few seconds, frothed milk flows out
of the milk spout into the cup below.
The milk will stop automatically and delivery
of coffee will begin.
Information: If during delivery you want to
stop preparing milk, press the italian MACCHIATO
icon or interrupt preparation of the coffee by
pressing the icon.
Making hot milk
1. After attaching the milk container, position
the frothed milk regulator (B1) according to
the quantity of froth you require (pos. 1 =
little froth; pos. 2 = abundant froth).
2. Press the HOT MILK icon (g.31). “HOT
MILK” appears on the display and after a few
seconds, frothed milk is delivered from the
milk spout into the cup below. Delivery of
milk stops automatically.
Information: If during delivery you want to
stop preparing milk, press the HOT MILK icon
once.
Cleaning the milk container after use
Important! Danger of burns When cleaning
the internal tubes of the milk container, a little hot
water comes out of the frothed milk tube (B5).
Avoid contact with splashes of water.
When “Press CLEAN button” flashes on the
display (each time you use a milk function):
1. Leave the jug attached the machine (you do
not need to empty it);
2. Place a cup or other recipient under the
frothed milk spout.
3. PresstheCLEANbutton(g.32)and keep
pressing until the progress bar which
appears on the display together with the
message “Cleaning...” is complete.
4. Remove the milk container and always clean
thenozzlewithasponge(g.33).
Information!
• When“PressCLEANbutton”ashesonthe
display, you can still prepare any type of
coffee or milk. If you have to make a number
of drinks with milk, wait until you have
delivered the last cup before cleaning the
container.
• The milkleft inthe jug canbe keptin the
refrigerator.
Programming the size for each beverage
button
The appliance is factory preset to automatically
deliver standard quantities.
To change these quantities, proceed as follows:
1. Place a cup under the coffee spouts and milk
spout.
2. Press the icon corresponding to the function
you want to program (LATTE, CAPPUCCINO,
ITALIAN MACCHIATO or HOT MILK) until
“Milk for... Program quantity” appears on
the display and the icon corresponding to
the selected function flashes.
3. Release the icon. The appliance starts
delivering milk.
4. When the required quantity of milk has been
delivered into the cup, press the icon again.
5. After a few seconds, the appliance starts
delivering coffee into the cup and the
message “Coffee for... Program quantity”
is displayed (with the exception of the HOT
MILK function) and the icon flashes.