Delta SIG110LED Ventilation Hood User Manual


 
Page 4.
MODEL SIG110LED
DELTA ELECTRONICS THREE YEAR LIMITED WARRANTY
Delta Electronics Inc. (“Delta Electronics”) warrants to the original
consumer purchaser in the USA that the Breez ventilation fan products
will be free from defects in material or workmanship. This warranty is
limited to three (3) years from the original date of purchase.
Limitations and Exclusions
1. During the warranty period, a replacement for any defective product
will be supplied free of charge for installation by the consumer. The
warranty provided herein does not cover charges for labor or other
costs incurred in the troubleshooting, repair, removal, and installation
service.
2. All returns of defective parts or products must include the product
model number, and must be made through an authorized Delta
Electronics distributor. Authorized returns must be shipped prepaid.
Repaired or replacement products will be shipped by Delta Electronics
F.O.B. shipping point.
3. Delta Electronics shall not be liable for any indirect, incidental,
consequential, punitive, or special damages arising out of or in connec-
tion with products use or performance, regardless of the form of
action whether in contract, tort (including negligence), strict product
liability or otherwise.
4. This warranty does not extend to uorescent lamp starters and tubes.
5. The warranty does not cover if user does not comply with manufacturer’s
installation manual.
6. To qualify for warranty service, you must notify Delta Electronics at the
address or telephone number below.
7. Delta Electronics shall have no liability to the original owner-user with
respect to any defect caused by abuse, misuse, neglect, improper
transportation or storage, improper testing, improper installation,
improper operation, improper use, improper maintenance, improper
repair, improper alteration, improper modication, tampering or
accident of products or parts thereof, or unusual deterioration or
degradation of products or parts thereof due to a physical environment
beyond the requirements of products’ specications.
Address: 4405 Cushing Parkway, Fremont, CA 94538
US Toll Free Number: 1-888-979-9889
5. Operation
5-1. Turn the POWER switch on/o to operate the fan / LED light /
LED night light. The LED indicator will be green when the fan is
turned on.
MAINTENANCE WARNING:
Disconnect the power source before working on the unit. Routine
maintenance must be done every year.
CAUTION:
1. Never use gasoline, benzene, thinner or any other such
chemicals to clean the ventilating fan.
2. Do not allow water to enter the motor.
3. Do not soak resin parts in water over 60°C (140°F).
CLEANING
1. To remove the
grille, pull down the spring and power
connects of the LED light engine.
2. Wash and clean the grille carefully. CAUTION: Do not let water
into the LED light engine. (Use non-abrasive kitchen
detergent and wipe dry with a clean cloth.)
3. Remove dust and dirt from the ventilating fan.
4. Using a cloth dampened with non-abrasive kitchen detergent,
remove any dirt from ventilating fan. Wipe dry with a clean
cloth.
5. Replace the grille.
DIMENSIONS
SPECIFICATIONS - LED LIGHT ENGINE
ITEM
SPEC.
DIMENSIONINCH
8L×4.4W×1.4H
MAIN LIGHT POWER CONSUMPTIONW
13
NIGHT LIGHT POWER CONSUMPTIONW
2
MAIN LIGHT LUMINOUS FLUXLM
800
CORRELATED COLOR
TEMPERATURE
(
K
)
2700
LIGHT SOURCE LIFEHOURS
30000MIN.
TRANSIENT PROTECTION
CLASS A
OPERATING FREQUENCYHZ
120
FCC QUALIFIED
YES
ENERGY QUALIFIED
YES
ROHS QUALIFIED
YES
LUc/LU STNEMERIUQER YTEFAS
WARRANTY
SPECIFICATIONS-FAN
Note: Design and specications subject to change without notice.
Model No.
Voltage
(V)
120 60 13.1 110 10 23.0
Frequency
(Hz)
Power
@ 0.1”SP
(W)
Air Flow
@ 0.1”SP
(CFM)
Weight
(lb.)
Power
@ 0.0SP
(W)
SIG110LED