Filter
Top Products
11. Have you checked for leaks at all water supply connections- and at the drain?
Operating Method
1. Turn on the water tap, let the water trough fill, then switch the ICE/OFF/WASH
switch on the front panel to the ICE position. The ice maker will start working
automatically.
2. After three minutes, the machine will automatically go to the ice making stage, and
the sound of flowing water will be heard.
3. When the batch of ice has been fully formed, ice will automatically be harvested to
the ice storage bin.
4. When the ice storage bin is full, the sheet of cubes will not fall completely and will
hold the ice-full probe open. The machine stops making ice and automatically
progresses to the cold preservation stage. During this stage, the compressor works
regularly to keep the temperature lower to reduce ice melting.
5. The unit will start making ice again after the ice cubes are removed. At that time, the
ice-full probe swings back to operating position.
IMPORTANT:
•
Although the unit has been tested and cleaned at the factory, due to long-term transit
and storage, the first batch of cubes must be discarded.
• Never turn the water supply tap off when the ice maker is working.
• Never touch the evaporator when the machine is running.
• Except to take ice from the unit, keep the door closed to reduce melting and insure
proper ice formation.
How the machine Makes Ice
Turn the ICE/OFF/WASH switch to the ICE position. The machine will automatically
start the ice making stage.
16