Filter
Top Products
13
Setting Surface Controls
OPERATING THE SINGLE SURFACE RADIANT
ELEMENTS
CACA
CACA
CA
UTIONUTION
UTIONUTION
UTION
Radiant surface elements may appear to have cooled after they have been turned OFF. HE (Hot Element)
message will turn ON and will continue to glow until the glass cooktop has cooled down to a moderate
level. The glass surface may still be hot and burns may occur if the glass surface is touched before the
indicator light has turned OFF.
Do not place plastic items such as salt and pepper shakers, spoon holders or plastic wrappings on
top of the range when it is in use. These items could melt or ignite. Potholders, towels or wooden spoons
could catch fire if placed too close to the surface elements.
The cooktop has single radiant surface elements at 2 locations; the right and left
rear (Figs. 1 & 2) element positions.
To Operate the Single Surface Element
1. Place correctly sized cookware on the radiant surface element.
2. Touch and hold the
POWER
key pad until a beep sound. The power indicator light
above the
POWER
will turn ON. Note: If no other key pad is touched within 20