Filter
Top Products
16
Setting Surface Controls
KEEP WARM FEATURE
The Warm feature may be used with any of the Cooking Elements.
To Turn the Keep Warm Feature ON:
1. To select the Keep Warm feature for any Cooking Element touch the
On/Off
key pad for
the corresponding Cooking Element.
2. Touch the
key pad located in the main control area. The associate display will show
LhLh
LhLh
Lh
(low heat - Fig. 1) indicating that the Cooking Element is properly set to Keep
Warm. If no other key pads are pressed the control will activate the desired Cooking
Element at the Keep Warm setting.
MINUTE TIMER
The Minute Timer feature may be useful in the kitchen if a recipe calls for keeping track of
time. This feature will keep track of time from 1 to 99 minutes. The LED display located to
the left of the Timer UP/DOWN arrow key pads will begin to count down minutes once set.
To Set the Minute Timer:
1. Touch the listed under the symbol . Touching and releasing the or the
key pads will increase or decrease the Minute Timer setting by 1 minute with each key
press (up to
9999
9999
99 minutes).
2. Once the Timer LED displays the desired amount of time, release the UP or DOWN
Arrow key pads to allow the minute timer to begin the countdown. Once the Minute
Timer reaches
0000
0000
00 long beeps will sound indicating that the time is up. To stop the
control from beeping, touch the and key pads at the same time.
To Cancel the Minute Timer:
1. Touch the and key pads at the same time or touch and hold either the or
key pad and scroll to
0000
0000
00.
2. If cancelling the Minute Timer using the scrolling method, once the Main Control LED
reaches
0000
0000
00, release the Arrow key pad.
3. The set time will disappear from the LED indicating that the MinuteTimer is no longer
active.
Fig. 1